Analisis Eksperimental Sistem Kelistrikan Body pada Motor Honda Supra Fit New 2006

Dewa Nyoman Susilayasa; Nurhidayati Nurhidayati; Kasum Kasum; Dadang Rustandi; Yusuf Maulana

doi:10.59603/niantanasikka.v4i4.1464

Authors

Dewa Nyoman Susilayasa Akademi Teknologi Bogor
Nurhidayati Nurhidayati Akademi Teknologi Bogor
Kasum Kasum Akademi Teknologi Bogor
Dadang Rustandi Akademi Teknologi Bogor
Yusuf Maulana Akademi Teknologi Bogor

DOI:

https://doi.org/10.59603/niantanasikka.v4i4.1464

Keywords:

Body Electrical System, Charging System, Diagnosis, Honda Supra Fit New 2006, Repair

Abstract

The body electrical system of the Honda Supra Fit New 2006 supports lighting, signaling, charging, and riding safety. In vehicles with long service life, wiring and connection faults can reduce system reliability. This study aimed to analyze the condition of the body electrical system, diagnose the source of faults, conduct repairs, and evaluate system performance after repair. An experimental method was applied to one Honda Supra Fit New 2006 through visual inspection, circuit checks, multimeter measurements, replacement of damaged components, functional testing, and a road test. The initial inspection identified worn and peeled body wiring, several loose connections, a lamp socket deformed by heat, and non-functioning headlamp and brake lamp due to a short circuit. Repairs included replacing one complete body wiring set, the headlamp, and the brake lamp, followed by rearrangement and rechecking of the wiring connections. After repair, battery voltage was 12.6 V with the engine off and 13.9 V with the engine running. The headlamp, brake lamp, turn signals, horn, panel indicators, and grounding operated normally. These results show that systematic diagnosis and replacement of damaged components restored the tested body electrical functions.

References

Amiruddin, M., & Rohmantoro, D. (2020). Modifikasi Sistem Penerangan AHO dengan Pengisian Fullwave untuk Meningkatkan Arus dan Tegangan Pengisian pada Motor Honda Scoopy. Journal of Automotive Technology Vocational Education, 1(2), 9–18. https://doi.org/10.31316/jatve.v1i2.990

Anggoro, S., Nurisna, Z., Safitri, M., & Pratama, A. W. (2021). Analisis Sistem Kelistrikan Body pada Sepeda Motor Suzuki Nex-FI. Quantum Teknika: Jurnal Teknik Mesin Terapan, 2(2), 75–79. https://doi.org/10.18196/jqt.v2i2.10693

Anugrah, R. A. (2024). Variasi Tiga Metode Pendeteksian Kerusakan Sistem Electronic Fuel Injection pada Sepeda Motor. JUITECH: Jurnal Ilmiah Fakultas Teknik Universitas Quality, 8(1), 10–17. https://doi.org/10.36764/ju.v8i1.1346

Chrisnadivanda, A. H., Sukrawan, Y., & Mahatkarsa, G. C. (2026). Analisis Pengaruh Variasi Putaran Engine dan Beban Kelistrikan terhadap Tegangan Output Sistem Pengisian Sepeda Motor. Jurnal Pendidikan Vokasi Otomotif, 8(2), 73–87. https://doi.org/10.21831/jpvo.v8i2.96545

Darojad, A. I., Putra, H. S., Pratiwi, Y. R., & Akuan, A. (2024). Pengaruh Diameter serta Gulungan Terhadap Arus dan Tegangan dalam Pengisian Fullwave Motor Supra. Journal of Science Nusantara, 4(2), 65–70. https://doi.org/10.28926/jsnu.v4i2.1490

Ilyas, M., Hutagalung, J. E., & Suparmadi. (2022). Penerapan Metode Forward Chaining Pada Sistem Pakar Untuk Diagnosa Kerusakan Sepeda Motor Berbasis Web. Building of Informatics, Technology and Science (BITS), 4(2), 932–942. https://doi.org/10.47065/bits.v4i2.2163

Junaidi, Ritonga, D. A. A., & Rusadi, A. G. (2025). Perancangan dan Analisis Kinerja E-Fort (Electric Fortress) Sebagai Alat Penstabil dan Proteksi Arus Listrik Pada Sistem Kelistrikan Sepeda Motor Honda ADV 150. JET (Journal of Electrical Technology), 10(3), 67–73. https://doi.org/10.30743/jet.v10i3.13129

Karimah, C. N., Zain, A. T., & Nofiansyah, A. L. (2023). Analisa Baterai Sebagai Sumber Kelistrikan Kendaraan Roda Dua Ditinjau Dari Kapasitas Dan Efisiensi. Jurnal Teknik Terapan, 2(1), 1–11. https://doi.org/10.25047/jteta.v2i1.24

Mujib, A., Rijanto, A., & Zulfika, D. N. (2020). Analisis Pengaruh Putaran Mesin Terhadap Tegangan Pengisian Baterai Pada Vario 150 cc. Majamecha, 2(1), 72–83. https://doi.org/10.36815/majamecha.v2i1.738

Nasution, M. (2021). Karakteristik Baterai Sebagai Penyimpan Energi Listrik Secara Spesifik. JET (Journal of Electrical Technology), 6(1), 35–40. https://doi.org/10.30743/jet.v6i1.3797

Nurhidayat, & Nasrullah, H. (2022). Overhoul Mesin Motor Supra Fit New 2006. Jurma: Jurnal Program Mahasiswa Kreatif, 6(2), 495–500. https://doi.org/10.32832/jurma.v6i2.2613

Nurhidayat, & Nasrulloh, H. (2022). Improvement of Electrical Circuit Simulation of Wipper System. Jurma: Jurnal Program Mahasiswa Kreatif, 6(2), 490–494. https://doi.org/10.32832/jurma.v6i2.2612

Pere, F. X., & Prasetyaningrum, P. T. (2023). Sistem Pakar Diagnosa Kerusakan Kendaraan Sepeda Motor Manual Menggunakan Metode Forward Chaining. Journal of Computer and Information Systems Ampera, 4(2), 76–92. https://doi.org/10.51519/journalcisa.v4i2.384

Sugiarto, T., Rizal, M. A., Fernandez, D., & Arif, A. (2023). Analisis Penggunaan Beberapa Jenis Lampu Utama Sepeda Motor Terhadap Intensitas Cahaya. JTPVI: Jurnal Teknologi Dan Pendidikan Vokasi Indonesia, 1(1), 133–144. https://doi.org/10.24036/jtpvi.v1i1.14

Tjiptady, B. C., Fitriani, I. M., Rahman, R. Z., Zamzami, M. R. A., Zamzami, M. A., & Darmawan, K. (2024). Vespa Motorcycle Lighting Modification Using AHP System With Fullwave Ignition. G-Tech: Jurnal Teknologi Terapan, 8(3), 2013–2019. https://doi.org/10.33379/gtech.v8i3.4820